Courtesy of Bonhams

Knox automobiles were built in Springfield, MA, from 1900 to 1914. The earliest production Knox three-wheelers were built in the Waltham Watch Company’s Springfield factory.

For 1903, just one model was cataloged, the Model C, built on a wheelbase slightly extended over its predecessor of 72 inches. The clever, compact, runabout bodywork was retained, a design that provided the option of an additional two seats that folded out in front of the driver, a style frequently referred to as a “Stanhope” on other contemporary cars of this era, and could arguably be the original “2+2.” A particularly appealing aspect to Knox coachwork is a molding that follows the contour of the body sides.

Knox identified its vehicles simply by numbering the base of the “porcupine” cylinder, and on this car the number is found to be “202.” Of surviving examples, this places the car into the production sequence for 1903. The lovely, radially spoked wire wheels would be phased out for the 1904 year.

The chassis and running gear are correct Knox and little looks to have changed from its factory specification. Currently, the car is running on an early Ford-type carburetor, but the correct Knox carburetor is included with the car.

The coachwork, though clearly an original period body, is not the typical Stanhope type fitted to Knox automobiles. It is high quality and attractive, with fine upholstery and a nice latching iron top. It’s likely that this original coachwork was sourced from another car during restoration. Either way, it looks at home on the car and is far preferable to a newly made reproduction body.

SCM Analysis

Detailing

Vehicle:1903 Knox Model C Runabout
Years Produced:1902–04
Number Produced:500 (estimated)
Tune Up Cost:$250 (estimated)
Chassis Number Location:Brass plate, screwed to the body in the left rear wheelwell
Engine Number Location:Cylinder base
Club Info:Horseless Carriage Club of America
Website:http://www.hcca.org
Alternatives:1901–07 “Curved Dash” Oldsmobile, 1902–04 Cadillac Model A, 1927–31 Ford Model A

This car, Lot 142, sold for $45,920, including buyer’s premium, at Bonhams’ Newport, RI, auction on September 20, 2022.

A Knox primer

Knox originated in Massachusetts at the turn of the last century. Founder Harry A. Knox was neighbors with famed auto pioneer J. Frank Duryea, who encouraged Harry to build his own automobile. After Knox graduated from the Springfield Technical Institute, he became an apprentice with the Elektron Mfg. Company, which made Perret electric motors. In 1905, he left Elektron to work for the Overman Wheel Company in Chicopee Falls, MA, where he built three gasoline-powered cars. Knox resigned when Overman elected to manufacture a steam car instead.

Teaming up with E.H. Cutler, his former boss at Elektron, Knox built a series of 15 three-wheeled runabouts in 1900. By 1902, he’d manufactured 250 cars, and he’d started building four-wheelers. But by 1904, he had left his eponymous company over a dispute with Cutler.

An air-cooled car, the Knox was popularly promoted as the “Knox Waterless.” In lieu of cooling fins, the single cylinder that comprised its 157-cc, 10-hp engine has about 800 pins screwed into the cylinder barrel. These ¼-inch-diameter, two-inch-long protrusions reportedly led the public to call this model “Old Porcupine,” as the engine resembled the spiky rodent with its sharp quills. Another slogan was, “The car that never drinks.” This Knox has a 2-speed manual planetary gearbox, leaf-spring suspension front and rear, two-wheel rear brakes, a chain-driven rear end and handsome wire wheels.

A Knox completed the grueling Glidden Tour in 1906, without a single penalty point. Knox built its first water-cooled model in 1908; the air-cooled cars were soon discontinued, and later Knoxes included larger 4- and 5-cylinder-powered cars and limousines. Knox continued to build autos in small volumes until 1914, after which cars were discontinued and the company was reorganized. It then built commercial vehicles until 1919.

Old and improved

This example has a correct 1903 Knox chassis and running gear, but the engine is equipped with an early Ford-type carburetor, likely in the interest of better running. The car has also been fitted with a belt-driven starter-generator system, ensuring easier starts with no hand-cranking.

Although the Runabout body on this Knox is purported to be a period unit, it’s not an original Knox Stanhope. But as the catalog asserts, it’s a more desirable choice than a reproduction body. This Model C is fitted with a button-tufted black leather interior and a smart-looking folding top. There’s no steering wheel — a brass-plated tiller suffices.

Bonhams’ research noted that “Knox enjoys a fine reputation today for high quality and novel engineering. Its straightforward mechanics and lack of water cooling make maintenance and use simple. The big engine provides excellent hill-climbing power, and the planetary transmission is easy to operate.”

Horses for courses

One of the attractions of an early Brass Era car like this is its eligibility for the famed London-to-Brighton Veteran Car Run. Britain’s oldest motoring event, London-to-Brighton is held every year in early November, when about 300 Veteran Brass cars descend upon London’s Hyde Park for a roughly 54-mile trek on the old A23 road that’s a true test of driver and machine.

To be eligible, a car must be largely correct and pre-1905. European makes such as Darracq, Panhard et Levassor and Renault (and early Cadillacs) generally sell for six-figure sums. Eligible American cars like “Curved Dash” Model R Oldsmobiles, Model A Fords and Ramblers are mid-five-figure cars. The event is sponsored by Hagerty, and this year the Hagerty folk are driving — wait for it — a 1903 Knox!

Now in its 126th year, the London-to-Brighton Run was publicized in a famous 1953 British comedy film called “Genevieve,” with a 1904 Darracq in the starring role. For decades, Veteran car owners worldwide have flocked to London to make the Run. It’s always cold and it usually rains. Since these spindly old cars have low cruising speeds, it takes hours to make the trip, but finishing is considered a badge of honor among Brass-Era enthusiasts and that has driven up the prices of eligible cars.

Inexpensive and unique

We’d call this car well-bought. Despite its replacement body and incorrect carburetor, this Knox’s comparatively low price and rarity made it an attractive purchase. Comparable turn-of-the-century Brass cars have sold for considerably more. The Waterless Knox is a ticket to ride on the popular London-to-Brighton run, and its curious engineering ensures its lasting appeal. ♦

(Introductory description courtesy of Bonhams.)

Comments are closed.